Loading NuWatt Energy...
We use your location to provide localized solar offers and incentives.
We serve MA, NH, CT, RI, ME, VT, NJ, PA, and TX
Loading NuWatt Energy...
NuWatt designs, installs, and manages solar, battery, heat pump, and EV charger systems across 9 states. One company, one warranty, one point of contact.
Get a Free Quote
StandardReliable, connected, and budget-friendly
The Rheem EcoNet is a smart-enabled heat pump with Wi-Fi connectivity and EcoNet app control. While it lacks cold-climate ratings, it pairs with Rheem's broad air handler lineup for straightforward ducted installs.
HSPF2
9.5
SEER2
16
Min Temp
5°F
Noise
58 dB
Configuration
standard
HSPF2 (Heating Efficiency)
9.5
Good — federal minimum is 7.5 HSPF2
SEER2 (Cooling Efficiency)
16
Very Good — federal minimum is 14.3 SEER2
Min Operating Temperature
5°F
Operating limit only; verify matched-system capacity at the local design temperature.
Noise Level
58 dB
Catalog sound value; check mode, distance and measurement basis before comparing models.
Compressor Warranty
10 Years
Catalog parts term: 5 years. Registration deadlines and coverage conditions vary; see the exact certificate.
Project Pricing
Calculated for your home
Address, system type, tonnage, zones, and installation scope determine the range
Catalog planning comparison of heating capacity, cooling capacity and COP. Verify each value against the exact manufacturer match before equipment selection.
| Size | Heating @ 47°F | Heating @ 17°F | Heating @ 5°F | Heating @ -5°F | Cooling @ 95°F | COP @ 47°F | COP @ 17°F | COP @ 5°F | COP @ -5°F |
|---|---|---|---|---|---|---|---|---|---|
| 2 Ton | 24,000 BTU/h | 15,000 BTU/h | 10,800 BTU/h | 7,200 BTU/h | 24,000 BTU/h | 3.5 | 2.2 | 1.6 | 1.2 |
| 3 Ton | 36,000 BTU/h | 22,500 BTU/h | 16,200 BTU/h | 10,800 BTU/h | 36,000 BTU/h | 3.4 | 2.1 | 1.5 | 1.1 |
| 4 Ton | 48,000 BTU/h | 30,000 BTU/h | 21,600 BTU/h | 14,400 BTU/h | 47,000 BTU/h | 3.3 | 2 | 1.4 | 1 |
| 5 Ton | 56,000 BTU/h | 35,000 BTU/h | 25,200 BTU/h | 16,800 BTU/h | 56,000 BTU/h | 3.2 | 1.9 | 1.3 | 0.9 |
Product-family catalog values are not an AHRI certificate or a site design. Final equipment selection requires current matched-system documentation.
Our installer-grounded read on the Rheem EcoNet, computed from how its specs compare against the rest of the equipment NuWatt installs.
The Rheem EcoNet is a mainstream-tier heat pump in the lineup NuWatt installs — a balanced pick when budget matters but you still want a real warranty and proven hardware. Its SEER2 of 16 is 3.0 points below the median — fine for cooler-summer regions like coastal Maine, but not the unit we lead with for hot Texas summers. HSPF2 of 9.5 trails the median by 1.5 — expect higher winter electric usage than the cold-climate leaders.
Selection method: DOE Building America cold-climate sizing guidance. Confirm the exact matched equipment and design heat loss before deciding on backup heat.
The 5°F operating floor means homes in northern Vermont, New Hampshire, and inland Maine will need backup heat for the coldest stretches. Mass Save, Efficiency Maine, and Efficiency Vermont all favor true cold-climate units in their highest rebate tiers, so this product may not unlock the largest incentives. At 58 dB this unit is louder than most condensers we install. On a tight urban lot or against a bedroom wall, that can be the deciding factor.
SEER2
-3.0
vs catalog median
HSPF2
-1.5
vs catalog median
Min temp
+15°F
vs catalog median
Compressor warranty
median
vs catalog median
Rebate amounts vary by equipment and income. See what you qualify for.
Check My Eligibility“The Rheem EcoNet is one of the simplest units for our crews to install. Standard connections, broad air handler compatibility, and conventional wiring mean fewer surprises. The EcoNet module connects to the homeowner's Wi-Fi during commissioning. Typical install: 1 day.”
— NuWatt Energy Install Team
A heat pump increases your electricity usage by 3,000–6,000 kWh per year. Offset that cost with solar panels and power your heating with free sunshine. NuWatt designs integrated solar + heat pump systems for maximum savings.
Research
You just did this
Calculate
See your savings
Save
Lock in your price
You've done the reading. Now see how the numbers look for your specific zip code and utility bill.
Check My EligibilityTalk to an expertNo credit card required. 100% free. Takes about 2 minutes.
Installed cost depends on the exact tonnage, number of indoor and outdoor units, ductwork, electrical work, access, and local incentives. Use NuWatt's address-based heat-pump calculator for a preliminary project range; a site visit is required before a firm quote.
The catalog shows 2 to 5 ton options. Do not choose tonnage from floor area alone: use room-by-room Manual J loads, the local design temperature, duct airflow and the exact matched system's heating and cooling capacity. Ask for the sizing calculation and AHRI match with the proposal.
The catalog operating limit is 5°F. That does not prove whole-home heating capacity at that temperature or rule out backup heat. Compare the exact AHRI match and low-temperature output with the home's design heat loss before selecting backup or all-electric operation.
Our catalog lists 10-year compressor and 5-year parts terms. Verify the current manufacturer's certificate for the exact model, registration deadline, location, ownership transfer and maintenance conditions. Parts coverage is not automatically installation-labor coverage; request both terms in writing.
Our catalog lists 9.5 HSPF2 for heating and 16 SEER2 for cooling. These are seasonal ratings, not a guaranteed percentage reduction in your bill. Verify the exact AHRI-rated indoor/outdoor combination and applicable equipment category. Compare low-temperature capacity, the local climate, controls, duct losses and the actual electricity and replacement-fuel rates before estimating operating cost.
Our catalog lists an outdoor sound rating of 58 dB. Compare the exact model's manufacturer sound data using the same operating speed, measurement distance and sound-power or sound-pressure basis. Placement, reflections and nighttime operation affect what you hear; a catalog number alone cannot establish which system will be quietest at your home.